Service Description

An Electrical Installation Condition Report (EICR) is a testing & inspection procedure prescribed by the BS7671 Wiring Regulations. It is intended to determine the overall safety of the electrical system and identify any issues which need to be addressed. An overall statement of either “Satisfactory” or “Unsatisfactory” will be made. A “Satisfactory” outcome means that the system is safe for continued use under the current conditions for a period specified by the inspector. This is usually 5 years but could vary depending on findings. An “Unsatisfactory” outcome means that there are serious safety concerns which need to be corrected. The inspector will advise how urgently such issues need to be addressed. In addition to the ‘overall outcome’, the inspector will provide a checklist of all items tested / inspected along with a schedule of test results and a list of observations. Available Options: 1-Bed Apartment Vacant = £120 / Occupied = £205 2-Bed Apartment Vacant = £150 / Occupied = £235 1/2-Bed House Vacant = £160 / Occupied = £245 3/4-Bed House Vacant = £180 / Occupied = £265 5/6-Bed House Vacant = £210 / Occupied = £295 7+ Bed House vacant = £50 per circuit / Occupied = £85 per circuit If Occupied… All occupants of the property should be prepared for… Loss of power during the testing and expectation procedures. The inspector repetitively accessing all areas of the property. Long test leads trailing through the property. If Vacant… The property should be completely vacant of all occupants, furniture, stored items or other trades people. Included: Inspection & testing of the entire electrical system. A complete BS7671 Compliant Electrical Installation Condition Report Requirements: Access to a copy of any previous EICRs and/or electrical installation certificates. Clear unhindered access to the main incoming supply cable and meter.. Clear unhindered access to the main consumer unit/fuse box. Clear unhindered access to incoming water stop tap/gas meter/oil meter as applicable. Clear unhindered access to all electrical points. (e.g. sockets, switches, light fittings etc). Electrical supply to the property will be fully disconnected during testing procedures. Not Included: Alterations to structures in order to access points listed above. Testing/inspection of non-fixed appliances. Diagnosis of any known/discovered faults. Repair/correction/modification/upgrading of the existing electrical system.