Fuse Box Replacement / Upgrade
From £800 on completion of work (deposit payable 7 days in advance)
Service Description
Disconnect and remove the existing main distribution gear to a single residence and install a new domestic consumer unit. The consumer unit supplied will be midrange and fully compliant with the current BS7671 Wiring Regulations. The new consumer unit will be fire retardant with surge protection and individual Type A RCBO protection to each circuit. Available Sizes: SMALL - 10 ways. Minimum space required: Height 300mm - Width 350mm - Depth 150mm. = £800 MEDIUM - 14 ways. Minimum space required: Height 410mm - Width 330mm - Depth 150mm. = £940 LARGE - 20 ways. Minimum space required: Height 520mm - Width 330mm - Depth 150mm. = £1,150 It is recommended to select a size which will leave at least 2 spare ways for future additions.. This package is not suitable for… Non-Residential Property. High Rise Residential Buildings (7 Storeys or more / 18m or higher). Purpose Built Student Accommodation. Houses in Multiple Occupation (HMO). Care Homes. Included: BS7671 Compliant Consumer unit. Standard entry glands/backing plate as necessary. Standard fixings. Type 2 Surge Protector. Type A RCBO devices to each circuit as necessary. Blank modules (if required). Final circuit testing. BS7671 Compliant Electrical Installation Certificate. Part P Building Control Compliance Notification & Certificate. Requirements: Sufficient space to accommodate the new consumer unit. Clear unhindered access to the incoming electrical supply & meter, workspace around the main distribution gear and all electrical points and outlets throughout the property. Existing electrical supply must be sufficient and in a safe/compliant condition. Existing bonding conductors to gas/water/oil services must be present and sufficient. Only safe/compliant circuits can be reconnected to the new consumer unit. Electrical supply to the property will be disconnected during work. Not Included: Removal of any existing structures which hinder sufficient access to existing distribution gear. Alterations to surrounding/mounting structures. Alterations to associated containment systems (e.g. trunking / conduit / swa). Additional/non-standard fixing Modification/upgrading of existing electrical supply or earth electrode, if required. Modification/upgrading to existing, or installation of new bonding to gas/water/oil services, if required. Modification/upgrading/repair to final circuits which are unsafe for reconnection to the new consumer unit. Waste disposal.








Contact Details
07552122391
tim@fuseboxwales.com
APPROVED ELECTRICIAN for Swansea & Llanelli areas. (Fusebox Wales), Bradford Street, Llanelli, UK